Leeb Hardness Tester NOVOTEST T-D2 is designed for rapid non-destructive hardness testing of various objects. Leeb Hardness Tester NOVOTEST T-D2 uses dynamic method of hardness testing – Leeb method, standardized according to ASTM A596. Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, materials with coarse-grained structure, solid products, etc.
Leeb Hardness Tester NOVOTEST T-D2 is designed for rapid non-destructive hardness testing of various objects. Leeb Hardness Tester NOVOTEST T-D2 uses dynamic method of hardness testing – Leeb method, standardized according to ASTM A596. Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, materials with coarse-grained structure, solid products, etc.
Allows user to test the products with weight more than 5 kg and thickness more than 10mm without any additional actions
Restrictions about the using of Leeb Hardness Tester NOVOTEST T-D2
If user need test items which are weighing less than 5 kg or thinner than 10 mm, he has to lap tightly the tested product to a surface of the base plate which are weighing more than 5 kg
Allows to test the products with coarse, non-uniform structure (castings, forgings)
Very ease and simplicity in setup and operation
Reasonable price (lower in comparison with the ultrasonic hardness tester)
Standard 2 GB SD memory card data storage (can accomodate up to 16GB card size)
Standard USB connection to allow data to be downloaded from the flaw detector for further analysis or storage
Reports produced in jpeg or bmp format
No need for special reading software programs or interface cables
A simple on-board data logger to collect and save thickness measurements
subscribe to receive promotions and offers, and download the content
You have successfully subscribed to the newsletter
There was an error while trying to send your request. Please try again.
Thanks for your download!
SAVE CLOSE THIS MESSAGE AND CLICK THE PDF YOU WANT TO DOWNLOAD, WE ARE HAPPY TO BE ABLE TO OFFER WHAT YOU WERE LOOKING FOR